|
CLEANER and SOFTER LAUNDRY
Soft
water helps eliminate Soil more effectively, clothes look brighter, feel softer and last longer because each cleaning
actually lets detergents get down to the cloth fibers, removing dirt like they were made to do.
MORE EFFICIENT, LONGER
LASTING PLUMBING AND APPLIANCES
Hard water has an obvious adverse effect on appliances and plumbing systems.
It's easiest to see as the rock-hard scale that forms on showerheads, faucets, and humidifiers, but it also builds up rapidly
in dishwashers, clothes washers, pipes, and water heaters, decreasing their efficiency and life.
Soft water helps
eliminate these problems, so appliances and plumbing systems operate more efficiently, and last longer.
QUICKER, EASIER HOUSECLEANING
With
soft water, a quick rinse or once-over wipes and cleans sinks, tubs, shower tiles, and plumbing fixtures - less hard water
soap scum to scour and scrub. No more harsh chemicals, either. Floors, windows, and woodwork clean better with soft water.
"Since the water has been ionized, drinking this
water will hydrate you, your pets, and farm animals much better"
AQUALIZER FLOW RATES,
AQ 1
3/4"X9" 15 GPM
AQ2 1'x12'
25GPM
AQ3 1 1/2"X12" 50GPM
AQ4
2"X12" . 50GPM
AQ5 3"X12"
100GPM
AQ6 3"X36" 100GPM
AQ7
4"X36" 200GPM
AQ8 6"X36"
500GPM
AQ9 8"X36" 800GPM
AQ10
10"X36" 1,300GPM
AQ11 12"X36"
2,100GPM
With the Aqualizer you will find that there is
no lime or scale buildup on your fixtures. The Aqualizer reduces scale, corrosion and surface tension, which makes the
water wetter. This will aid in cleaning. Decreasing gaseous content breaks down excessive salts, inhibits algae,
fungus and mildew growth.
IMPORTANT NOTE: The Aqualizer so
efficient, it will actually pull old scale from existing pipe work, eliminating it forever! Scale that has formed
over years, and years of use will disappear... dissolved by the Aqualizer over a period of a few weeks. Depending on your
pipes' condition, the Aqualizer can help you have super-clean pipes for life!
INSTRUCTIONS TO INSTALLERS
Warranty will be void if these instructions are not followed
Recommended installations: 1. Above ground
or 2. In an irrigation control box.
Precautions
- Use only non-oil base pipe joint compound. Use only
non-lead, water soluble flux.
- Use Flux sparingly. Remove all excess flux from
fittings and inside of unit.
- Never allow any direct contact between two dissimilar metals
in the piping system. With dissimilar metals in pipes or fittings, isolate the conditioner with insulated couplings
on each end.
- Attach brass or stainless steel ground clamps with brass or
stainless steel bolts.
Procedure
- USE PROPER INSTALLATION PROCEDURES according to the type of
material used for the water line. (see installation diagrams)
- DO NOT OPEN the conditioner HOUSING.
- USE TEFLON TAPE on threaded connections on each end of the
conditioner housing.
- USE INSULATED COUPLINGS at each end of the conditioner when
installing into any metal pipe.
- DO NOT APPLY HEAT directly to the conditioner or to insulated
couplings.
- DO ALL SOLDERING that is upstream from the conditioner BEFORE
final connection of the conditioner to the pipe. (Be certain all flux is burned off).
- FLUSH OUT ALL FLUX from inside the water line before final
connection of the conditioner.
- EARTH GROUND IS MANDITORY. Use copper of silver
grounding rod from 4 to 8 feet in length. Connect the conditioner housing ground clamp to the ground rod with number
14 insulated stranded copper wire. (see grounding instructions).
|
